Your Cart is Empty

How to Fix a Damaged USB Cable: The Ultimate Guide

by UPSCALED August 22, 2022 2 POPULAR READ

How to Fix a Damaged USB Cable: The Ultimate Guide

Introduction: Why is My USB Cable Damaged?

A damaged USB cable can be frustrating. You might want to know what the most common reasons for USB cable damage are so that you can avoid them in the future.

The most common reasons for damaged USB cables are:

  • The cable is old and the wires inside have been stretched or broken.
  • The cable has been bent too many times.
  • The cable is not plugged in all the way.
  • The cable was plugged into a power source that has too much voltage.
  • The wire is not properly insulated and has been exposed to water, which shorted it out.

Possible Causes of Damage

A cracked USB cord is one of the most common causes of damage to a USB port. When the cord is bent too much, it can break and cause the wires inside to separate. The wire could also be pinched in a door or other object, which would lead to a break in the wire. Liquid damage is another possible cause for damage to your USB port. The liquid could have spilled on your device and caused it to short circuit or corrode the wires inside. If you are using a device with a touchscreen, liquid can seep into crevices that are difficult to clean out and cause corrosion on the motherboard. .In many cases, when a damaged USB port is located in the same area as the battery, it is possible that liquid damage of some type has caused an electrical short. Sometimes this happens when the device is dropped on its face, or if liquid comes into contact with the battery and shorting out one of the circuit boards inside. If this was your case, , it would be best to repair or replace your device.




3 Easy Steps to Repair a Damaged USB Cable

A damaged USB cord can be a major inconvenience. You may not have the time to go out and buy a new one, or you may not want to spend money on something that will only last for a few months.

Luckily, there are some simple ways to fix your USB cord so that it is good as new.

  1. Cut the damaged cable in half and remove the plastic casing.
  2. Strip about 1 inch of insulation from each wire.
  3. Twist the two wires together and wrap them in electrical tape for extra protection.
Connor ODea
Connor ODea

Also in News

Galaxy S24 Ultra
Galaxy S24 Ultra Software: What New Features may It Have?

by UPSCALED October 20, 2023 5 POPULAR READ 0 Comments

Explore the cutting-edge software innovations and exciting new features that the Galaxy S24 Ultra may bring to the table. Dive into the world of Samsung's flagship smartphone and discover the enhancements and capabilities that could redefine your mobile experience. Stay ahead of the curve with our in-depth look at the potential software upgrades in the Galaxy S24 Ultra.
Edifier NeoBuds Pro
Edifier NeoBuds Pro Tutorial: How to Use the Edifier Connect App

by UPSCALED October 20, 2023 4 POPULAR READ 0 Comments

The Edifier Connect app is a companion app for Edifier NeoBuds Pro true wireless earbuds. It allows you to customize the settings of your earbuds, such as the EQ profile, touch controls, and ANC mode. You can also use the app to update the firmware of your earbuds and check the battery level.
Coros Vertix 2
Coros Vertix 2 Tutorial: Essential Tips and Tricks for Beginners

by UPSCALED October 19, 2023 4 POPULAR READ 0 Comments

The Coros Vertix 2 is a powerful GPS smartwatch with a wide range of features. It can be used for a variety of activities, including running, cycling, hiking, mountaineering, and more. From tracking your heart rate during a vigorous hike to analyzing your sleep patterns for better recovery, this smartwatch is designed to be your all-in-one outdoor and fitness companion. But like any advanced piece of technology, there's a learning curve. That's where we come in. We'll break down the essential functions, walk you through key settings, and introduce you to some hidden gems that will make your Coros Vertix 2 experience both enjoyable and highly beneficial.